Sample BMatte Flyer
Sample BMatte Flyer
Our Soft BMatte Flyers are a solid 100% black - acid free sulfite paper and custom pressed using our high resolution DTF transfers. Like all of our products, you can purchase just the transfer, the transfer and the paper or we can print and press for you on 9 different available colors. See our T-Paper product page for additional information.
All you need is a heat press to get started. Pressing DTF transfers on flyers require usually less than 10 seconds depending on the paper ana a temperature setting of @ 220°F.
Sheet Quantity Sizes
Sheet Quantity Sizes
Sheet Quantity Sizes
X-Large: 12" width or 14" height, best for L - XXXL shirts.
Large: 7 3/8" width, best for S - L shirts
Medium: 5 1/2" width, best for S - M shirts
Small: 3 3/4" width, best for left chest, caps and sleeves
Add-on: 3 1/2" width or 2 1/2" height, best for t-shirt Add-ons, caps and sleeves
Couldn't load pickup availability
Heat Press Instructions
Heat Press Instructions
For Cotton Tees
1. Set Heat Press to 300° F
2. Pre-press blank shirt for 5 seconds to remove wrinkles and moisture
3. Place transfer glossy side up on shirt
4. Cover the transfer with a Teflon sheet or parchment paper
5. Press with medium-to-firm pressure for 10 seconds
6. Pull Teflon sheet and rub transfer with firm pressure using a dry eraser or old tee
7. Pull transfer using a shallow motion when cooled
8. Re-press an additional 5 seconds without Teflon to extend shirt life
IMPORTANT TIPS
We print on Hot/Warm peel v6 DTF film. For best results, pull the transfer within 10 -15 seconds.
If you are new to DTF, it may help to first test your press or iron on an old shirt of the same fabric.
Cotton blends and Polyesters require less press time (around 7 - 8 seconds) at a lower temperature (around 270° F - 280° F)
Shipping & Return Policy
Shipping & Return Policy
Shipping Policy
We normally ship ready-to-press DTF transfers within 1 business day. You can select your preferred shipping method at check-out.
Return Policy
We provide full replacement on defective DTF transfers only. Please contact us using our online contact form to receive your RMA number and further instructions.
Share
