Gang Sheet Builder
Gang Sheet Builder
Create 22" gang sheets up to 60" in length. Get crop, rotate, color adjust, auto stack and background removal tools. Plus you can use our high-res collection of gallery designs, fonts and even connect to your Canva® projects.
Heat Press Instructions
Heat Press Instructions
For Cotton Tees
1. Set Heat Press to 300° F
2. Pre-press blank shirt for 5 seconds to remove wrinkles and moisture
3. Place transfer glossy side up on shirt
4. Cover the transfer with a Teflon sheet or parchment paper
5. Press with medium-to-firm pressure for 10 seconds
6. Pull Teflon sheet and rub transfer with firm pressure using a dry eraser or old tee
7. Pull transfer using a shallow motion when cooled
8. Re-press an additional 5 seconds without Teflon to extend shirt life
IMPORTANT
Always test fabrics using an old shirt to help adjust settings.
Hot peel popularity is gaining ground, but we still prefer cold peel. Either one should be tested on the first peel to determine which works best for your press and fabric.
Cotton blends and Polyesters require less press time (around 7 - 8 seconds) at a lower temperature (around 270° F - 280° F)
Shipping & Returns
Shipping & Returns
Shipping Policy
We normally ship ready-to-press DTF transfers within 1 business day. You can select your preferred shipping method at check-out.
Return Policy
We provide full replacement on defective DTF transfers only. Please contact us using our online contact form to receive your RMA number and further instructions.
