Colorado Mountains DTF Transfer

Small: 3 1/2" wide up to 4 1/2" long, ideal for shirt pockets and caps.

Medium: 5 1/2" wide up to 7" long, best for Small shirts.

Large: 7 1/2" wide up to 9 1/2" long for small to Medium shirts.

X-Large: 11 1/2" wide up to 15" long for L, XL and 2XL shirts.

* transfer width may be reduced if the length is greater than 15"

For Cotton Tees

1. Set Heat Press to 300° F
2. Pre-press blank shirt for 5 seconds to remove wrinkles
3. Place transfer glossy side up on shirt
4. Cover the transfer with a Teflon sheet or parchment paper
5. Press with medium-to-firm pressure for 10 seconds
6. Pull Teflon sheet and rub transfer with firm pressure using a dry eraser or old tee
7. Pull transfer while still warm pulling with a shallow motion
8. Re-press an additional 5 seconds without Teflon to extend shirt life

NOTE:
Always test fabrics using an old shirt to help adjust settings.

Cotton blends and Polyesters require less press time (around 7 - 8 seconds) at a lower temperature (around 270° F - 280° F)