Pleasing Everyone DTF Transfer

Small: 3 1/2" wide up to 4 1/2" long ideal for shirt pockets and caps.

Medium: 5 1/2" wide up to 7" long, best for S shirts.

Large: 7 1/2" wide up to 9 1/2" long for small to M shirts.

X-Large: 11 1/2" wide up to 15" long for L, XL and 2XL shirts.

Note: If necessary, the transfer width will be reduced until the length is less than 15". This maintains aspect ratio while and allows smaller heat presses to be used.

For Cotton Tees

1. Set Heat Press to 300° F
2. Pre-press blank shirt for 5 seconds to remove wrinkles
3. Place transfer glossy side up on shirt
4. Cover the transfer with a Teflon sheet or parchment paper
5. Press with medium-to-firm pressure for 10 seconds
6. Pull Teflon sheet and rub transfer with firm pressure using a dry eraser or old tee
7. Pull transfer while still warm pulling with a shallow motion
8. Re-press an additional 5 seconds without Teflon to extend shirt life

NOTE:
Always test fabrics using an old shirt to help adjust settings.

Cotton blends and Polyesters require less press time (around 7 - 8 seconds) at a lower temperature (around 270° F - 280° F)