American Steampunk DTF Transfer

Sheet Quantity: Quantity of transfers per 22" gang sheet

Add-on: 3 3/4" wide or larger if purchased as an Add-on Press Location with a shirt order

X-Large: Up to 11 1/4" wide, best for L - X-L shirts.

X-Tall: Up to 14" tall, best for L - XL shirts

Tall: Up to 12" tall, best for M - L shirts

Large: Up to 7 3/8" wide, best for S-M shirts

Medium: Up to 5 1/2" wide, best for S shirts

Small: 3 3/4" widt, best for left chest and caps

* Height dimensions are limited to 14" to accommodate most heat presses.

For Cotton Tees

1. Set Heat Press to 300° F

2. Pre-press blank shirt for 5 seconds to remove wrinkles and moisture

3. Place transfer glossy side up on shirt

4. Cover the transfer with a Teflon sheet or parchment paper

5. Press with medium-to-firm pressure for 10 seconds

6. Pull Teflon sheet and rub transfer with firm pressure using a dry eraser or old tee

7. Pull transfer using a shallow motion when cooled

8. Re-press an additional 5 seconds without Teflon to extend shirt life

NOTE:
Always test fabrics using an old shirt to help adjust settings.

Hot peel popularity is gaining ground, but we still prefer cold peel. Either one should be tested on the first peel to determine which works best for your press and fabric.

Cotton blends and Polyesters require less press time (around 7 - 8 seconds) at a lower temperature (around 270° F - 280° F)

Shipping Policy

We normally ship ready-to-press DTF transfers within 1 business day. You can select your preferred shipping method at check-out.

Return Policy

We provide full replacement on defective DTF transfers only. Please contact us using our online contact form to receive your RMA number and further instructions.