Fat Jokes DTF Transfer
Fat Jokes DTF Transfer
Choose a Ready-to-Press DTF transfer size from 3.5" to 11.5" wide. Each design promises vibrant colors that withstand countless washes.
Transfers per Sheet
Transfers per Sheet
The number of transfers per gang sheet is determined by how many can fit within its 22" x 12" dimension.
Small: 3 1/2" wide up to 4 1/2" tall, ideal for shirt pockets and caps.
Medium: 5 1/2" wide up to 7" tall, best for Small shirts.
Large: 7 1/2" wide up to 9 1/2" tall for small to Medium shirts.
X-Large: 11 1/2" wide up to 15" tall for L, XL and 2XL shirts.
* transfer width may be reduced if the length is greater than 15"
Heat Press Instructions
Heat Press Instructions
For Cotton Tees
- Set Heat Press to 300° F
- Pre-press blank shirt for 5 seconds to remove wrinkles and moisture
- Place transfer glossy side up on shirt
- Cover the transfer with a Teflon sheet or parchment paper
- Press with medium-to-firm pressure for 10 seconds
- Pull Teflon sheet and rub transfer with firm pressure using a dry eraser or old tee
- Pull transfer using a shallow motion when cooled
- Re-press an additional 5 seconds without Teflon to extend shirt life
NOTE:
Always test fabrics using an old shirt to help adjust settings.
Hot peel popularity is gaining ground, but we still prefer cold peel. Either one should be tested on the first peel to determine which works best for your press and fabric.
Cotton blends and Polyesters require less press time (around 7 - 8 seconds) at a lower temperature (around 270° F - 280° F)
Shipping & Return Policy
Shipping & Return Policy
Shipping Policy
We normally ship ready-to-press DTF transfers within 1 business day. You can select your preferred shipping method at check-out.
Return Policy
We provide full replacement on defective DTF transfers only. Please contact us using our online contact form to receive your RMA number and further instructions.